An enzyme-linked immunosorbent assay for aconitine-type alkaloids using an anti-aconitine monoclonal antibody

3-Succinylaconitine was conjugated with bovine serum albumin (BSA) for use as an immunogen for the preparation of a monoclonal antibody (MAb) against aconitine (Aco). Splenocytes from mice immunized with the Aco-BSA conjugate were fused with an aminopterin-sensitive mouse myeloma cell line, P3-X63-Ag8-653, and a hybridoma secreting a MAb against Aco was successfully obtained. The MAb cross-reacted with mesaconitine, hypaconitine and jesaconitine, which are Aco-type alkaloids, but not with any other compounds examined. The full measurement range of an enzyme-linked immunosorbent assay (ELISA) developed using the new MAb extended from 100 ng mL⁻¹ to 1.5 μg mL⁻¹ of Aco. The concentrations of Aco-type alkaloids in various Aconiti radixes assayed using the new ELISA method showed good agreement with previous reports.     

Inclusion of cut and as-grown single-walled carbon nanotubes in the helical superstructure of schizophyllan and curdlan (beta-1,3-glucans)

We have found that single-chain schizophyllan and curdlan (s-SPG and s-curdlan, respectively) can dissolve as-grown and cut single-walled carbon nanotubes (ag-SWNTs and c-SWNTs, respectively) in aqueous solution. The vis-NIR spectra of the composites suggest that c-SWNTs are dissolved as a bundle, whereas ag-SWNTs exist as one or only a few pieces in the tubular hollow constructed by the helical structure inherent to these beta-1,3-glucans. EDX and CLSM measurements and TEM observation established that the distribution map of these polysaccharides overlaps well with the image of SWNTs, indicating that these two components form a composite. Very interestingly, when c-SWNTs were dissolved with the aid of s-SPG or s-curdlan in water, a clear periodical structure with inclined stripes, as detected by AFM, appeared on the fibrous composite surface. Because this periodical structure has never been recognized for the composites with other water-soluble polymers, one can regard that s-SPG or s-curdlan wraps c-SWNTs constructing a helically twined structure. High-resolution TEM observation of an ag-SWNTs/s-SPG composite gave a clearer image in that two s-SPG chains twine one ag-SWNT and the helical motif is right-handed. When this sample was subjected to the AFM measurement, the composite showed the 2-3 nm height. This height implies that one piece of ag-SWNT is included in the s-SPGs helical structure. As a summary, it has been established that beta-1,3-glucans such as s-SPG and s-curdlan not only dissolve SWNTs but also create a novel superstructure on the surface.     

Flexible transparent conducting single-wall carbon nanotube film with network bridging method

Hollow ZrO(2) microspheres with mesoporous shells have been synthesized by a novel hydrothermal reaction of zirconium oxychloride in the presence of urea, hydrochloric acid, and ethanol. The morphology and shell thickness of the hollow microspheres can be controlled by varying synthesis conditions. After calcination at high temperature, the morphologies of the hollow microspheres are essentially preserved. Pt catalyst supported on the hollow calcined ZrO(2) microspheres exhibits more excellent catalytic performance in CO oxidation than those on ZrO(2) powders derived from conventional precipitation methods.     

PREPARATION AND PROPERTY OF POLYMERIC PENDANT Ru(bpy)_3~(2+) COMPLEXES

Polymeric pendant Ru(bpy)_3~(2+) complexes were prepared from homopolymer and copolymers of 4-methyl-4'-vinyl-2,2'-bipyridine (Vbpy). Vbpy was prepared from 4-methylpyridine. The comonomers were styrene (St), acrylic acid (AA), N-vinylpyrrolidone (Pyr), 4-vinylpyridine (Vpy), methyl methacrylate (MMA), 2-hydroxyethyl methacrylate (HEMA), acrylonitrile (AN) and N-ethyl-4-vinylpyridium bromide (EQ-Vpy). The fraction of the pendant Ru(bpy)_3~(2+) repeating unit in the polymeric complex was 0.022 to 0.052. Absorption maximum, molar extinction coefficient, emission maximum and relative emission intensity of the polymeric complexes were studied.     

Pressurized liquid extraction of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and coplanar polychlorinated biphenyls from contaminated soil

Extraction solvents for pressurized liquid extraction (PLE) used to extract polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans (PCDD/PCDFs), and coplanar polychlorinated biphenyls (Co-PCBs) from contaminated soil were investigated. The PCDD/PCDFs and Co-PCBs in Certified Reference Material: CRM 0422 (Forest soil) were extracted using toluene, n-hexane, acetone, acetone/toluene and acetone/n-hexane (1:1, v/v). Soxhlet extraction was the reference method. Results demonstrated that PLE using mixed solvents produced better analyte recoveries than the single solvents. However, these results were lower than those for Soxhlet extraction. Additional extraction cycles using mixed solvents achieved better recovery results. Mixed solvents and several extraction cycles were necessary for satisfactory extraction of more tightly bound PCDD/PCDFs and Co-PCBs from soil.     

Ion-pair adsorption film colorimetry — A new simple method for ppb level of aluminum ion in water sample

A new, highly sensitive and simple colorimetric method for trace aluminum(III) with 2,2-dihydroxyazobenzene, H₂L, is described, based on the ion-pair adsorption of the anionic Al chelate, [A1L₂ ^–, with crystal violet cation, CV⁺, on the surface of Polyvinylchloride film plasticized with dioctylphthalate. The blue violet species, CV⁺[A1L₂]^–, is enriched onto the transparent film, leading to a remarkable enhancement of the sensitivity, and the detection limits are 3 ng/ml by spectrophotometry and 5 ng/ml by visual colorimetry, respectively. Using spectrophotometer, a linear calibration curve is obtained over the concentration range of 0 to 50 ng/ml of Al. Further, the color system, consisting of red ([A1L₂]^–), yellow (H₂L), and blue violet (CV⁺), gave clear color changes suitable for visual determination of aluminum with an applicable range of 0 to above 3000 ng/ml. The four different color zones are khaki for 0–5 ng/ml, reddish-brown for 5–200 ng/ml, blue violet for 200 ng/ml-3g/ml, and colorless for more than 3g/ml. The proposed method has been successfully applied for the determination of aluminum in tap waters.     

Inclusion Complex Formation of Thiacalix[4]arene and Xe in Aqueous Solution Studied by Hyperpolarized 129Xe NMR

The inclusion complex formation of 4-sulfothiacalix[4]arene sodium salt (STCAS) and Xe has been investigated by using hyperpolarized ¹²⁹Xe NMR spectroscopy. Our new continuous-flow type hyperpolarizing system has advantageous capabilities that can supply hyperpolarized gases continuously and directly to a sample solution in a NMR tube. Consequently saturated Xe concentration in the aqueous solution of STCAS is maintained during the NMR experiment, and ¹²⁹Xe NMR spectra can be obtained in remarkably short time. STCAS concentration dependence of ¹²⁹Xe chemical shift has been analyzed in an elaborated way by a computer method as well as a simple graphic method that we have proposed. The association constant K:13.6±0.8 M⁻¹ at 25 °C was obtained, and further analysis of the temperature dependence has successfully given thermodynamic parameters of enthalpy (ΔH) and entropy (ΔS) for the inclusion complex formation: ΔH = −11.9±1.9 kJ mol⁻¹ and ΔS = −17.4±5.8 JK⁻¹ mol⁻¹. The energetic aspects of complex formation are discussed from the size effect and from the molecular theory of standard entropy, and a release of definite number of water molecules from STCAS cavity is suggested in the inclusion complex formation with Xe.     

Oxidative status of human low density lipoprotein isolated by anion-exchange high-performance liquid chromatography--assessment by total hydroxyoctadecadienoic acid, 7-hydroxycholesterol, and 8-iso-prostaglandin F(2alpha)

This study aims to measure the oxidative status of LDL from human plasma (n=26) as assessed by biomarkers for lipid peroxidation, total hydroxyoctadecadienoic acid (tHODE), 7alpha- and 7beta-hydroxycholesterol (t7-OHCh), and 8-iso-prostaglandin F(2alpha) (t8-iso-PGF(2alpha)) after subfractionation of LDL with an anion-exchange HPLC (AE-HPLC). LDL was separated and quantified by AE-HPLC as LDL-1, LDL-2, and LDL-3 in the order of the anionic charge of the LDL particles. The concentrations of tHODE, t7-OHCh, and t8-iso-PGF(2alpha) in both plasma and LDL subfractions were assessed after reduction and saponification. In this method, the free and ester forms of hydroperoxides, ketones, and hydroxides of linoleic acid and cholesterol are measured as tHODE and t7-OHCh, respectively. It was found that tHODE significantly correlated with the proportion of LDL-2 and LDL-3 as well as with the concentration of malondialdehyde-modified LDL in plasma. Further, by the analyses of LDL subfractions, the concentrations of tHODE, t8-iso-PGF(2alpha), and t7-OHCh in LDL-3 were found to be significantly higher than those in LDL-1 and LDL-2. These results clearly indicate that the extent of oxidation increases in the order of LDL-1相似文献   

RBM band shift-evidenced dispersion mechanism of single-wall carbon nanotube bundles with NaDDBS

The dispersion process of single-wall carbon nanotube (SWNT) by using sodium dodecylbenzene sulfonate (NaDDBS) was studied by means of surface tension measurements, ultraviolet-visible (UV-Vis) spectroscopy, scanning electron microscopy (SEM), and transmission electron spectroscopy (TEM). The critical micelle concentration (CMC) and the concentration where the surface tension begins to drop increase by the presence of SWNT. The isotherm of NaDDBS amount adsorbed on SWNT shows the plateau region at 0.2-6 mM and the saturated region above 40 mM. The external surface of SWNT bundle is fully covered with adsorbed NaDDBS at the plateau region, showing that SWNTs can be dispersed with the bundle form. On the other hand, SWNTs are dispersed in individual tubes at the saturated region, where the adsorption amount corresponds to coating of individual tube surfaces with NaDDBS. This dispersion state was confirmed by SEM and TEM observations. The effect of the dispersion state of SWNTs on radial breathing mode in Raman spectrum gave inherent peak shifts, being the in situ evidences on the step-wise dispersion mechanism of the SWNT bundle to the individual tubes.     

Nitrogen adsorption on fluorinated activated carbon fiber

Nitrogen adsorption isotherms for fluorinated activated carbon fiber (F-ACF) and fluorinated carbon black (F-CB) were measured at 77 K. Surface structures of F-ACF and F-CB were examined by _s -plot analysis using the adsorption data on the nonporous carbon black (CB) and F-CB. The surface energy of F-ACF was lower than that of ACF. The micropore structure of ACF was preserved even after fluorination, although the limiting adsorption amount and the micropore width decreased with fluorination.